- Recreate the projectRun the example design’s Tcl script in Vivado. It adds the IP repository, builds the block design and applies the constraints.
- Choose the buildIn the IP GUI pick the transceiver, set the AXI4-Lite clock, switch on the pixel layouts and bit depths your cameras use, and set pixels per beat and bits per component to match the logic behind
video_out. - Build and exportGenerate the bitstream and export the hardware platform for Vitis.
- Build the applicationCreate the Vitis platform and application, add the example sources and the driver.
- RunProgram the board and plug in the camera. The console prints the core version and build, runs discovery and moves to the camera’s operating speed.
- Check the linkThe connection locks, frames are counted and the error counters stay at 0. CRC errors point at the cable, connector or equalizer; a line width error at a pixel format that does not match the camera.
Data Sheet
CoaXPress 2.1 Host IP Core
- Document ID
- APT-DS-CXP-HOST-0001
- Revision
- 1.0
- IP version
- 2.2.1
- Release date
- November 2026
Chapter 5: Example Designs and Software