Document ID
APT-DS-CXP-HOST-0001
Revision
1.0
IP version
2.2.1
Release date
November 2026

IP core datasheet · Rev 1.0 · IP v2.2.1

CoaXPress 2.1 Host IP Core

The frame grabber side of a CoaXPress 2.1 link on AMD FPGAs. It locks to a camera at CXP-1 to CXP-12, checks and sorts every packet, runs the uplink, changes line rate on its own, and hands your design whole frames as UG934 AXI4-Stream video in the pixel format you select at run time.

  • JIIA CXP-001-2021 v2.1
  • CXP-1 to CXP-12
  • GTH or GTY
  • UG934 AXI4-Stream video
  • AXI4-Lite control
  • Vivado IP Integrator
CXP camera CoaXPress 2.1 Device any vendor coax FMC equalizer + uplink driver APT-C11 AMD FPGA / ZYNQ ULTRASCALE+ MPSOC GTH / GTY transceiver wrapper supplied with the core CXP-1 to CXP-12 up to 12.5 Gb/s 32b + K uplink 20.83 / 41.67 Mb/s APOTHEOTECH IP v2.2.1CXP HOSTLock, packet decode, CRCStream, control, event, triggerImage header and line checksUG934 pixel unpack, 25 formatsLine rate change, CXP-1 to 12 Processor + driver MicroBlaze, Zynq, Zynq MPSoC, PCIe AXI4-Lite VIDEO OUT AXI4-Stream, UG934, 2 or 4 px/beat INTO YOUR PIPELINE VDMA, PCIe DMA, ISP, encoder FRAME GRABBER SIDE
12.5Gb/s
per connection at CXP-12
1.22Gpx/s
Mono 8-bit on one CXP-12 connection
25
pixel formats: 5 layouts x 5 bit depths
14
interrupt sources, level or edge
2
transceiver types: GTH and GTY

Contents