The ApotheoTech CoaXPress 2.1 Host IP Core implements the Host link layer of the JIIA CXP-001-2021 CoaXPress standard, version 2.1: the side of the link that sits in a frame grabber or an embedded vision system and takes video from a camera. It runs on the GTH or GTY transceivers of AMD UltraScale+ devices through a transceiver wrapper supplied with the core, and drives the low-speed uplink to the camera.
The core locks to the camera, checks every packet, and sorts what arrives: stream packets go through the image header parser and the pixel path to an AXI4-Stream video master on your clock; control acknowledges, events, heartbeats and triggers go to registers, FIFOs and interrupts for software. On the uplink it sends control commands, triggers, event acknowledges and test packets. A line rate change is a single register write: the core rewrites the transceiver over DRP, resets it and reports the result.
The video output follows AMD UG934, so it connects to AMD video IP, a frame buffer writer, a PCIe DMA or your own pipeline without an adapter. The bus width and the set of pixel formats are chosen in the IP GUI, so a build carries only the formats your product uses.