Data Sheet
CoaXPress 2.1 Host IP Core
- Document ID
- APT-DS-CXP-HOST-0001
- Revision
- 1.0
- IP version
- 2.2.1
- Release date
- November 2026
Chapter 4
Register Map
Eighty-three 32-bit registers on AXI4-Lite in a 4 KB window: identification and interrupts, video, link control, the control channel, events, the image header, and the error and statistics counters.
- 4.1Register interface
- 4.2Register summary
- 4.3Identification and interruptsRead ID and VERSION before any write: they confirm the base address and the release. HWCFG and VIDEO_CAP tell software how the core was built.
- 4.4Video and connectionsPixel format of the stream: the layout and the bit depth on the link. A write restarts the stream path, so write it with the acquisition stopped. The value also leaves the core on...
- 4.5Link status and controlLive status of the receiver. Bits [20:11] describe the last line rate request and are laid out the same in the Host and the Device core.
- 4.6Control channelThe command is built in these registers and sent with CXP_LS_SEND.CTRL_CMD; the acknowledge is read back from the same block. See Control channel.
- 4.7Events, triggers and heartbeat
- 4.8Stream and image headerThe last stream packet and the last rectangular image header as received, for software that checks the camera’s geometry and format before it starts its own pipeline.
- 4.9Connection test
- 4.10Error countersOne counter per error, each with a sticky flag in CXP_ERRORS_HS (high-speed downlink) or CXP_ERRORS_LS (uplink) that raises HS_ERR or LS_ERR. The flag says that something...
- 4.11Statistics
- 4.12Link bring-up sequenceCoaXPress discovery and configuration as the supplied driver performs it, in register terms. Camera addresses are the CoaXPress bootstrap registers.