The core runs on an AMD UltraScale+ GTH or GTY transceiver, selected with Transceiver in the IP GUI. The transceiver wrapper is delivered with the core, set up for CoaXPress: line rates, 8b/10b, word alignment control and the DRP rate tables the core uses for a line rate change. The coax itself needs a CoaXPress equalizer and an uplink driver between the connector and the FPGA, as on the APT-C11-FMC.
- Lock. A connection is locked after 64 consecutive IDLE words by default (IDLE words for lock, 64 to 1,024) and counts an error when a run of words passes without an IDLE word (Words without IDLE for an error).
CXP_STATUS.RX_LOCKEDand the LOCKED and LOSS_LOCK interrupts report it. - Uplink. The core sends on
ls_tx_outat 20.83 Mb/s, or 41.67 Mb/s for CXP-10 and CXP-12 (CXP_LS_MODE.LS_RATE), with IDLE between packets. - Connections. The IP package builds one connection. Builds with 2 and 4 connections, for cameras on several coax cables, are available on request.