Document ID
APT-DS-CXP-HOST-0001
Revision
1.0
IP version
2.2.1
Release date
November 2026
Chapter 2: Functional Description

2.6Control channel

Software reads and writes the camera’s registers, its bootstrap registers and its GenICam description through the control channel. The core builds the packet, sends it on the uplink and collects the acknowledge:

  1. BuildWrite the command and size to CXP_CTRL_TX_CMD, the camera address to CXP_CTRL_TX_ADDR, and for a write the data words to CXP_CTRL_FIFO.
  2. SendWrite CXP_LS_SEND.CTRL_CMD. With CXP_LS_MODE.TAGGED = 1 the command carries the tag in CXP_CTRL_TX_TAG (CXP 2.x); with 0 it is untagged, as used for discovery.
  3. AcknowledgeThe CNTRL_ACK interrupt fires when the acknowledge is in. Read the code, size and tag, then the data words from CXP_CTRL_ACK_FIFO.

Acknowledges with a CRC, size or tag error are counted and flagged. The supplied driver wraps the sequence in read and write calls.