Every setting in the IP GUI is a drop-down list; fields the GUI works out are shown read-only. Software
reads the build back from HWCFG and
VIDEO_CAP, so one driver serves every build. Defaults
are in bold.
Table 3-1.Link page.
| GUI field | Parameter | Values | Description |
| Transceiver | TRANSCEIVER_TYPE | GTY (GTYE4), GTH (GTHE4) | Selects the DRP rate tables for the line rate change. |
| Connections | NUM_LANES | 1 | Coax connections. 2 and 4 on request. |
| AXI4-Lite clock (aclk) | ACLK_FREQ_MHZ | 50, 100, 125, 150, 200, 250, 300 MHz | Frequency of aclk; converts the line rate change timeouts to clock cycles. |
| Trigger acknowledge | TRIG_AUTO_ACK | By the core, By software | Who acknowledges a high-speed trigger from the camera. |
| Event acknowledge | EVENT_AUTO_ACK | By the core, By software | Who acknowledges an event packet. |
Table 3-2.Video page.
| GUI field | Parameter | Values | Description |
| Mono / Bayer | VID_EN_MONO | Built, Not built | Mono, Bayer and Raw layouts, 1 component. |
| RGB | VID_EN_RGB | Built, Not built | RGB, 3 components. |
| YCbCr 4:4:4 | VID_EN_YCBCR444 | Built, Not built | 3 components. |
| YCbCr 4:2:2 | VID_EN_YCBCR422 | Built, Not built | 2 components. |
| YCbCr 4:2:0 | VID_EN_YCBCR420 | Built, Not built | 4:2:0 on the bus, 4:2:2 on the link. |
| Bit depths on the link | VID_LINK_WIDTHS | 8, 10, 12, 14 and 16-bit, or any subset | The larger saving: each depth is a gearbox of its own. |
| Pixels per beat | VID_PPC | 2, 4 | Pixels per video_out beat. |
| Bits per component | VID_BPC | 8, 10, 12, 14, 16 | Component width on the bus. |
| Components per pixel | VID_CPP | read-only, 1 | 3 with RGB or YCbCr 4:4:4, 2 with YCbCr 4:2:2 or 4:2:0, else 1. |
| TDATA width (bit) | MAX_TDATA_WIDTH | read-only, 64 | VID_PPC x VID_CPP x VID_BPC, rounded up to whole bytes. |
| Pixel format after reset | PIXEL_TYPE_DEFAULT | 25 codes, Mono / Bayer 8-bit (0x08) | Reset value of PIXEL_TYPE and pixel_type_out. |
Table 3-3.Buffers page.
| GUI field | Parameter | Values |
| Control FIFOs (words) | CMD_PCKT_MAX | 1024, 2048, 4096 |
| Event FIFO (words) | EVENT_PCKT_MAX_SIZE | 512, 1024, 2048 |
| Stream FIFO (words) | STREAM_FIFO_DEPTH | 2048, 4096, 8192, 16384 |
| Video output FIFO (beats) | AXI4S_DEPTH | 512, 1024, 2048, 4096 |
Table 3-4.Advanced page.
| GUI field | Parameter | Values |
| Synchronizer flops | SYNC_STAGE | 2, 3, 4, 5, 6 |
| IDLE words for lock | IDLE_LOCK_CNTR | 64, 128, 256, 512, 1024 |
| Words without IDLE for an error | IDLE_ERR_NUM | 50, 100, 200, 500, 1000 |
| Extra reset attempts | RECONFIG_RETRIES | 0, 1, 2, 3 |
| DRP timeout | RECONFIG_DRP_TIMEOUT_US | 1 ms, 2, 5, 10 ms |
| Reset acknowledge timeout | RECONFIG_RST_ACK_TIMEOUT_US | 100 µs, 1, 10, 100 ms |
| Reset done timeout | RECONFIG_DONE_TIMEOUT_US | 20 ms, 50, 100, 200 ms |
From a block design script, for a Mono / Bayer and RGB build at 2 pixels of 8 bits on a GTH:
set_property -dict [list \
CONFIG.TRANSCEIVER_TYPE {GTHE4} \
CONFIG.ACLK_FREQ_MHZ {100} \
CONFIG.VID_PPC {2} \
CONFIG.VID_BPC {8} \
CONFIG.VID_EN_RGB {1} \
CONFIG.VID_LINK_WIDTHS {1} \
CONFIG.PIXEL_TYPE_DEFAULT {24} \
] [get_bd_cells cxp_host_0]
Leave VID_CPP and MAX_TDATA_WIDTH out of scripts: the GUI derives them from the
switches.