Document ID
APT-DS-CXP-DEV-0001
Revision
1.0
IP version
2.2.0
Release date
November 2026
Chapter 5: Example Designs and Software

5.3Example designs

Each example design is a complete Vivado project: the block design, constraints, a script that recreates the project, the transceiver wrapper and the firmware.

Basic camera

Included
Test patternframe sourceCXP Devicethis corevideo_inAPT-C11-FMCdriver + uplinkGTFrame grabberany CXP HostcoaxZynq MPSoCfirmware

A test pattern generator feeds the Device core, and the Zynq MPSoC runs the camera firmware: the command loop, the bootstrap registers, the line rate change and stream on and off. Plug it into any CoaXPress 2.1 frame grabber. The starting point for a camera: replace the test pattern with your image pipeline.

  • Core Device
  • Platform ZCU106 + APT-C11-FMC
  • Firmware bare-metal on the Arm cores

DisplayPort loopback

Included with Host + Device
Test patternframe sourceCXP Devicethis corevideo_inAPT-C11-FMCcoax loopcoaxCXP HostcorecoaxFrame bufferVDMA + DDRAXI4SDisplayPortPS DPvideoZynq PSdrivers, status

The Device and the Host core over coax through the APT-C11-FMC on one board, with the received video on the DisplayPort output of the Zynq MPSoC. Free to anyone who licenses both cores.

  • Cores Device and Host
  • Platform ZCU106 + APT-C11-FMC
  • Software bare-metal, DisplayPort

Custom integration

NRE

Work directly with ApotheoTech on your camera: your sensor and board, an SLVS-EC sensor through the ApotheoTech SLVS-EC Receiver on the same transceiver quad, an ISP in front of the core, 2 and 4 connection links, or a complete camera with its GenICam description.