Document ID
APT-DS-CXP-DEV-0001
Revision
1.0
IP version
2.2.0
Release date
November 2026

IP core datasheet · Rev 1.0 · IP v2.2.0

CoaXPress 2.1 Device IP Core

The camera side of a CoaXPress 2.1 link on AMD FPGAs. It takes your video as a UG934 AXI4-Stream, builds the image header and stream packets, sends them at CXP-1 to CXP-12, answers the frame grabber on the uplink, and changes line rate on its own.

  • JIIA CXP-001-2021 v2.1
  • CXP-1 to CXP-12
  • GTH, GTY or GTH TX only
  • UG934 AXI4-Stream video
  • AXI4-Lite control
  • Vivado IP Integrator
AMD FPGA / ZYNQ ULTRASCALE+ MPSOC IMAGE SOURCE sensor pipeline, ISP, TPG SLVS-EC RX connects as it is video_in, AXI4-Stream APOTHEOTECH IP v2.2.0CXP DEVICEUG934 pixel pack, 25 formatsImage header, stream packetsControl, event, heartbeatTriggers both directionsLine rate change, CXP-1 to 12 Processor + firmware MicroBlaze, Zynq, Zynq MPSoC AXI4-Lite 32b + K GTH / GTY transceiver wrapper, TX supplied with the core CXP-1 to CXP-12 up to 12.5 Gb/s FMC driver + uplink receiver APT-C11 uplink 20.83 / 41.67 Mb/s coax Frame grabber CoaXPress 2.1 Host any vendor
12.5Gb/s
per connection at CXP-12
1.22Gpx/s
Mono 8-bit on one CXP-12 connection
25
pixel formats: 5 layouts x 5 bit depths
14
interrupt sources, level or edge
TX
only: the GTH receivers stay free for your sensor

Contents