Document ID
APT-DS-CXP-DEV-0001
Revision
1.0
IP version
2.2.0
Release date
November 2026
Chapter 2: Functional Description

2.11Clocks and reset

Table 2-8.Clock domains.
ClockSourceRuns
tx_outclk2Word clock from the transceiver wrapper: line rate / 40, 312.5 MHz at CXP-12; changes with the speedPixel path, packagers, link transmit
aclkFree-running clock, 50 to 250 MHz, set in the GUI; also the time base of the heartbeat and the acknowledge timeoutsRegister file, interrupt controller, line rate change, heartbeat time
video_in_clkThe clock of your video source, any frequency that carries the pixel rateThe write side of the video FIFO and video_in
ls_clk_ddrClock of the uplink from the CoaXPress front endUplink receiver
drp_clkDRP clock of the transceiver wrapperDRP accesses for the line rate change
  • Clock aclk from a free-running clock and set AXI4-Lite clock in the GUI to its frequency: the heartbeat period, the time stamp and the timeouts depend on it.
  • Every crossing uses AMD XPM macros and constrains itself. Enable the XPM libraries in the project; do not add clock groups or false paths between these clocks.
  • reset_TX_PLL must reach the PLL and datapath reset of the transceiver wrapper, as in the example designs. Without it a line rate change ends with error code 2 or 3.
  • RST_CXP pulses resets for the whole core or one path (stream, acknowledges, events, heartbeat, command receiver, uplink), so firmware can recover a part without a reconfiguration.