Document ID
APT-DS-CXP-DEV-0001
Revision
1.0
IP version
2.2.0
Release date
November 2026
Chapter 2: Functional Description

2.5Image header and stream

The rectangular image header is built from registers: CXP_IMG_XSIZE, CXP_IMG_XOFFS, CXP_IMG_YSIZE, CXP_IMG_YOFFS, CXP_IMG_BPP, CXP_RECT_PIXELF, CXP_RECT_TAPG and CXP_RECT_FLAGS. They reset to the core’s defaults (3840 x 2160, 8 bits per pixel, BayerRG8) and are taken when firmware starts the stream:

  1. ConfigureWrite the image registers, PIXEL_TYPE and CXP_STREAM_PCKT_MAX with the packet size agreed with the Host.
  2. Stream onWrite STREAM_STATUS bit 0. The stream path takes the image registers and confirms; STREAM_ON fires and CXP_STATUS.HS_STREAM_ACTIVE rises.
  3. Stream offWrite STREAM_STATUS bit 1. The frame in flight is finished, then STREAM_OFF fires.

If the stream path does not confirm an on or off request within ACK_TIMEOUT, CXP_TIMEOUTS records it and ACK_ERR fires. The same applies to test packets on and off.