Document ID
APT-DS-CXP-DEV-0001
Revision
1.0
IP version
2.2.0
Release date
November 2026
Chapter 2: Functional Description

2.1Architecture

The core is the Device link layer. Video enters on an AXI4-Stream on your clock and crosses to the word clock of the transceiver, where it is packed, framed and sent as 32-bit words with K flags to the supplied transceiver wrapper. The uplink from the frame grabber enters on its own receiver. Firmware sees everything else through the register file.

tx_outclk2 (word clock = line rate / 40) video_inAXI4-Streamvideo_in_clk Video FIFO AXI4S_DEPTH Beat layout Mono, Bayer RGB, YCbCr 4:2:0 line store Pixel pack 8 to 16-bit link gearbox zero pad Image packager image header line markers size checks Stream packets packet size tag, CRC Link transmit priorities IDLE insertion to thetransceiver32-bit wordsand K flags Ack, event, heartbeat, trigger packet builders Line rate control DRP writes, PLL reset, retries Uplink RX commands, triggers, acks ls_rx_inls_clk_ddrfrom the FMC clock-domain crossing: configuration down, status, counters and packets up (inside the core) aclk (AXI4-Lite) AXI4-Lite register file and interrupt controller ID, build | interrupts | video | link | image header | ack and event builders s_axicxp_dev_int word clock domainaclk domainvideo clock side of the FIFOdata path
Figure 2-1.Functional block diagram. The transmit path runs on the transceiver word clock; the register file and the interrupt controller run on the AXI4-Lite clock; the video FIFO is written on the video clock; the uplink receiver runs on the clock recovered from the uplink. All crossings are inside the core.
  1. Video FIFOTakes the UG934 beats on video_in_clk and crosses them to the word clock.
  2. Beat layoutTakes the components of each pixel off the beat in the order of the selected layout; for YCbCr 4:2:0 a line store repeats the chroma of each even line on the odd line after it.
  3. Pixel packPacks the components at the bit depth of the link, 8 to 16 bits, in the CoaXPress order, and pads the last word of each line with zeros.
  4. Image packagerAdds the rectangular image header and the line markers from the image registers, and checks every line and frame against them.
  5. Stream packetsCuts the stream into packets of at most StreamPacketSizeMax bytes with stream ID, packet tag, size and CRC.
  6. Link transmitInterleaves triggers, acknowledges, events, heartbeats and stream packets by priority and inserts an IDLE word at least every 100 words.