Data Sheet
CoaXPress 2.1 Device IP Core
- Document ID
- APT-DS-CXP-DEV-0001
- Revision
- 1.0
- IP version
- 2.2.0
- Release date
- November 2026
Chapter 2
Functional Description
How the Device core turns AXI4-Stream video into a CoaXPress downlink and serves the frame grabber: the transmit path, the video bus and pixel formats, control and acknowledges, events, heartbeat, triggers, line rate change, interrupts and clocks.
- 2.1ArchitectureThe core is the Device link layer. Video enters on an AXI4-Stream on your clock and crosses to the word clock of the transceiver, where it is packed, framed and sent as 32-bit...
- 2.2Transceiver and linkThe core runs on an AMD UltraScale+ transceiver, selected with Transceiver in the IP GUI:
- 2.3Video busThe video input is an AXI4-Stream slave in the AMD UG934 video convention, the same beat the ApotheoTech Host core puts out, so what enters the Device leaves the Host bit for bit...
- 2.4Pixel formatsFirmware selects the format in PIXEL_TYPE and writes the matching CoaXPress pixel format code into the image header registers. The code is {layout, bit depth on the link}:
- 2.5Image header and streamThe rectangular image header is built from registers: CXP_IMG_XSIZE, CXP_IMG_XOFFS, CXP_IMG_YSIZE, CXP_IMG_YOFFS, CXP_IMG_BPP, CXP_RECT_PIXELF, CXP_RECT_TAPG and CXP_RECT_FLAGS....
- 2.6Control channelA CoaXPress camera answers the frame grabber’s register reads and writes: the bootstrap registers, the GenICam description and the camera’s own features. The Device core receives...
- 2.7Events, triggers and heartbeat
- 2.8Line rate changeThe frame grabber discovers the camera at a low speed and moves it to the operating speed with ConnectionConfig. When firmware has acknowledged that write, it writes the new speed...
- 2.9InterruptsFourteen sources feed one interrupt output, cxp_dev_int. ISR holds a sticky bit per source whether or not it is enabled, IER enables sources, IPR = ISR and IER shows what drives...
- 2.10BufferingThe defaults suit the example designs. Deeper FIFOs cost block RAM only.
- 2.11Clocks and reset