Document ID
APT-DS-CXP-DEV-0001
Revision
1.0
IP version
2.2.0
Release date
November 2026
Chapter 1: Overview

1.1Introduction

The ApotheoTech CoaXPress 2.1 Device IP Core implements the Device link layer of the JIIA CXP-001-2021 CoaXPress standard, version 2.1: the side of the link that sits in a camera and sends video to a frame grabber. It drives the GTH or GTY transmitter of an AMD UltraScale+ device through a transceiver wrapper supplied with the core, and receives the low-speed uplink from the frame grabber through the CoaXPress front end on the board.

Your image pipeline hands the core a UG934 AXI4-Stream. The core packs the pixels in the CoaXPress format of the selected pixel type, adds the rectangular image header and the line markers, cuts the stream into packets and sends them, with acknowledges, events, heartbeats and triggers interleaved by priority. Control commands from the frame grabber are handed to firmware, which owns the camera’s register space and GenICam description and answers through the acknowledge builder. A line rate change is a single register write.

The GTH transmitter only option uses only the transmit side of a transceiver, so the receivers of the same quad stay free for an SLVS-EC or other sensor interface. The default video bus is the 64-bit, 4-pixel beat of the ApotheoTech SLVS-EC Receiver, so a sensor stream connects to the Device core as it is.