- AXI4-Lite slave, 32-bit data, 12-bit byte address: a 4 KB window. Offsets are byte offsets from the base address assigned in the Vivado address editor.
- Access types: RO read-only, RW read/write, WO write-only, WP write pulses an action, W1C write 1 to clear, W1S write 1 to set, RC counter that takes any written value (write 0 to clear; reading does not clear).
- The core answers SLVERR for an access it refuses. Reads: an offset that is not a register,
STREAM_STATUS,CXP_CTRL_ACK_SENDandCXP_EVENT_SEND, the write-only FIFO ports, andCXP_CTRL_RX_FIFOwhile it is empty. Writes: an offset that is not a register, a read-only register, rate code 7, a connection count of 0 or above the build, a full acknowledge or event FIFO.RST_CXPis the one action register that reads, as 0. A register dump skips the refused reads; the supplied driver never makes them. - The first four words (ID, VERSION, HWCFG, SCRATCH) follow the same layout in every ApotheoTech core, so one probe routine identifies any of them.
Data Sheet
CoaXPress 2.1 Device IP Core
- Document ID
- APT-DS-CXP-DEV-0001
- Revision
- 1.0
- IP version
- 2.2.0
- Release date
- November 2026
Chapter 4: Register Map