Data Sheet
SLVS-EC Receiver IP Core
- Document ID
- APT-DS-SLVS-RX-0001
- Revision
- 2.1
- IP version
- 3.4.1
- Release date
- November 2026
Chapter 5
Example Designs and Software
Evaluation platforms, ready-to-build example designs, the bring-up flow and the software that ship with the core.
- 5.1Evaluation platformsExample designs target three boards. Each connects an SLVS-EC sensor module through an FMC adapter and runs the core with either bundled PHY.
- 5.2Demo bitstreamsPre-built bitstreams let you see your sensor streaming before you build anything.
- 5.3Example designsEvery example design is a complete, synthesizable Vivado project: the example top level in RTL source, constraints, a script that recreates the project, the bundled PHY and a...
- 5.4Bring-up flow
- 5.5SoftwareThe core comes with a software driver for setup and control, supplied on purchase, for MicroBlaze, Zynq-7000 and Zynq UltraScale+ MPSoC processors. It identifies the core and its...
- 5.6VerificationRelease 3.4.1 is verified on the AXI4S and NATIVE outputs with two independent benches. A VHDL testbench with its own SLVS-EC transmitter model runs a matrix over every lane...