Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026

IP core datasheet · Rev 2.1 · IP v3.4.1

SLVS-EC Receiver IP Core

Up to eight lanes of Sony image sensor data at up to 5.0 Gb/s per lane, turned into frame-ready AXI4-Stream or native video on AMD FPGAs, with header CRC, payload CRC32 and Reed-Solomon correction built in, the sensor’s embedded data on a stream of its own, and a PHY for transceivers or HP I/O included.

  • JIIA EVI-001-2019 v2.0
  • Baud Grade 1, 2, 3
  • MGT or HP I/O PHY
  • AXI4-Stream video
  • AXI4-Lite control
  • Vivado IP Integrator
Image sensor Sony Pregius / Pregius S SLVS-EC v2.0 TX 1 to 8 lanes up to 5.0 Gb/s per lane AMD FPGA / ZYNQ ULTRASCALE+ MPSOC SLVS-EC PHY bundled with the core GT Wizard (MGT) Baud Grade 1 to 3 or HP I/O Baud Grade 1, 2 16b + K per lane APOTHEOTECH IP v3.4.1 SLVS-EC RX Lane merge and alignment Header check, 3 x CRC16 CRC32 or Reed-Solomon ECC RAW8 to RAW16 unpack Framing, crop, output FIFO Processor + driver MicroBlaze, Zynq, Zynq MPSoC AXI4-Lite AXI4S VDMA, frame buffer, PCIe, CoaXPress NATIVE Video In to AXI4-Stream, DisplayPort EMBEDDED DATA optional AXI4-Stream, own clock ONE VIDEO OUTPUT PER BUILD
5.0Gb/s
per lane at Baud Grade 3
40Gb/s
aggregate line rate, 8 lanes
5
pixel depths, RAW8 to RAW16, set at run time
2bytes
corrected per block with Reed-Solomon ECC
2
bundled PHYs: MGT to Baud Grade 3, HP I/O to Baud Grade 2

Contents