Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 2: Functional Description

2.10Overflow and recovery

A sensor cannot be paused. When the output FIFO fills, the core gives up part of the video in a way that keeps the output well formed, and recovers by itself. Nothing has to be reset.

Table 2-11.Overflow behaviour.
NATIVEAXI4S
CauseA line longer than the line bufferm_axis_tready low for longer than the FIFO absorbs
What happensThe line ends early as a short line; the rest of the frame is dropped; vid_vblank rises normallyThe line in progress ends on its next beat with tlast; the rest of the frame is dropped; beats already in the FIFO come out in order
RecoveryNext Frame Start (lasting recovery needs lines that fit: crop or a deeper FIFO)First Frame Start that finds room; the stream restarts with tuser
ReportedVID_OVF_CNT: bit 31 sticky flag, bits 15:0 frames cut or dropped. Cleared by reset or VID_CTRL

The embedded data output behaves the same way on its own FIFO, reports in EBD_OVF_CNT, and never affects the image: a stalled metadata sink costs metadata only.

The consumer of an AXI4S output owns m_axis_aresetn (and m_axis_ebd_aresetn for the embedded data stream) and may pulse it at any time, for any length. tvalid drops at once, the FIFO is flushed and held empty while the reset is low, and the stream restarts on the next Frame Start with tuser. A stream reset is never counted as an overflow.