Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 2: Functional Description

2.3Packet handling

An SLVS-EC sensor sends one packet per line. Each packet carries a header (sent three times), the packed pixel payload padded to a multiple of 16 bytes, and, depending on the sensor mode, a CRC32 footer or Reed-Solomon parity. The receiver uses these header fields:

Table 2-2.Packet header fields used by the receiver.
FieldUse in the core
Frame Start / Frame EndOpen and close a frame. Every frame on the output begins with a start-of-frame mark.
Line ValidMarks packets that carry image lines. Blanking packets are not sent as video.
Embedded data lineLines of sensor metadata. Never part of the video output; delivered on the embedded data output when it is built.
Line length (sensor-specific header field)When the sensor reports the line length in the header, the core uses it instead of the LINE_LENGTH register.

One or two bad header copies are recovered from a good one and counted in HDR_CRC_ERR_CNT[15:0], an early sign of a marginal link. A packet whose three header copies all fail CRC16 is lost: it is not used as video and is counted in HDR_CRC_ERR_CNT[31:16]. If that packet was a Frame End the frame joins the next one; if it was a Frame Start that frame is dropped. The next good Frame Start resynchronises the output, so a single bad header never shifts the image.