Data Sheet
SLVS-EC Receiver IP Core
- Document ID
- APT-DS-SLVS-RX-0001
- Revision
- 2.1
- IP version
- 3.4.1
- Release date
- November 2026
Chapter 2
Functional Description
How the receiver turns SLVS-EC packets into video: the PHY, the datapath, payload protection, pixel formats, the two video outputs, the embedded data output, crop, buffering and clocks.
- 2.1ArchitectureThe core is the link layer of an SLVS-EC receiver and comes with the physical layer it runs on. The bundled PHY recovers the clock and data on each lane, aligns and decodes the...
- 2.2PHY optionsThe PHY is delivered with the core and is not configured by the user. Pick the one that fits the sensor mode and the board:
- 2.3Packet handlingAn SLVS-EC sensor sends one packet per line. Each packet carries a header (sent three times), the packed pixel payload padded to a multiple of 16 bytes, and, depending on the...
- 2.4Payload protectionSLVS-EC sensors protect the payload in one of two ways, chosen by the sensor mode. The receiver comes in a matching build, chosen with the Payload protection parameter (ECC_SEL)....
- 2.5Pixel formatsThe sensor packs pixels into bytes before sending them. Pixels wider than 8 bits send their top 8 bits as one byte each and bundle the remaining low bits of a small group into the...
- 2.6Video outputsOne parameter, Output (OUT_MODE), selects which video interface is built. Only the ports of the selected output appear on the IP. Both carry the same pixel format and the same...
- 2.7Embedded data outputSony sensors can send lines of metadata with each frame: register settings, frame counters, exposure and similar information. The video outputs carry image lines only. With...
- 2.8Framing and cropBoth outputs deliver clean frames:
- 2.9FIFO sizingThe core has one FIFO between the link and the video output, sized with Output FIFO depth (words) in the IP GUI: 128 to 16,384 words, default 2,048. One word is one output beat of...
- 2.10Overflow and recoveryA sensor cannot be paused. When the output FIFO fills, the core gives up part of the video in a way that keeps the output well formed, and recovers by itself. Nothing has to be...
- 2.11Clocks and reset