Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 2: Functional Description

2.2PHY options

The PHY is delivered with the core and is not configured by the user. Pick the one that fits the sensor mode and the board:

Table 2-1.Bundled PHY options.
PHYFPGA resourceBaud GradesMax per laneUse it when
APT-SLVS-EC GT WizardGTH or GTY transceivers (MGT)1, 2, 35.0 Gb/sThe sensor mode needs Baud Grade 3, or the lanes are routed to transceiver pins
SLVS-EC HP I/OHigh-performance (HP) I/O banks, no transceivers1, 22.5 Gb/sThe sensor mode runs at Baud Grade 1 or 2, transceivers are taken, or the lanes are routed to HP I/O

Both PHYs present the same interface to the core, so the rest of the design, the registers and the software do not change with the choice.