Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 1: Overview

1.5Supported image sensors

The receiver is validated with the Sony sensors below. It follows the standard rather than a sensor, so other SLVS-EC sensors work with the right register settings; ApotheoTech adds sensor-specific example software and bring-up support through an NRE engagement. Baud Grade 3 modes use the MGT PHY; Baud Grade 1 and 2 modes also run on HP I/O.

Table 1-3.Validated Sony SLVS-EC sensors. Frame rates are the sensor maximum in all-pixel mode at 8 / 10 / 12-bit, from Sony product information.
SensorFamilyResolutionSLVS-ECMax fps (8 / 10 / 12-bit)
IMX530Pregius S, 4th gen24.55 MP, 5328 x 46088 lanes, Baud Grade 3105 / 101 / 73
IMX547Pregius S, 4th gen5.1 MP, 2472 x 20642 lanes, Baud Grade 3122.9 / 122.1 / 82.4
IMX421Pregius, 3rd gen2.83 MP, 1936 x 14648 lanes, Baud Grade 2409.2 / 371.8 / 231.2
Other SLVS-EC sensorsSony SLVS-EC v1.x and v2.0 sensorsNRE engagement