Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 1: Overview

1.3Key specifications

Table 1-1.Key specifications of the SLVS-EC Receiver IP Core v3.4.1.
StandardJIIA EVI-001-2019, SLVS-EC Interface Standard v2.0, RX link layer
Lanes1, 2, 4, 6 or 8 (build-time parameter LANE_NUM)
Line rate per laneBaud Grade 1: 1.152 to 1.2 Gb/s (HP I/O or MGT PHY)
Baud Grade 2: 2.304 to 2.5 Gb/s (HP I/O or MGT PHY)
Baud Grade 3: 4.608 to 5.0 Gb/s (MGT PHY)
PHYBundled with the core: APT-SLVS-EC GT Wizard on GTH or GTY transceivers (Baud Grade 1 to 3), or SLVS-EC HP I/O PHY (Baud Grade 1 and 2)
Aggregate line rateUp to 40 Gb/s (8 lanes at 5.0 Gb/s); 32 Gb/s of payload after 8b/10b
Line coding8b/10b, decoded by the bundled PHY
Pixel formatsRAW8, RAW10, RAW12, RAW14, RAW16, selected by register
Line lengthUp to 65,532 pixels: a multiple of 4 at 1, 2, 4 and 6 lanes, a multiple of 8 at 8 lanes; by register or from the packet header
Header protectionThree header copies per packet, CRC16 each; bad copies and lost headers counted
Payload protectionCRC build: CRC32 footer check
ECC build: Reed-Solomon, 2 or 4 parity bytes per 224-byte block
Video outputAXI4-Stream or native video (build-time parameter OUT_MODE)
Embedded dataOptional AXI4-Stream M_AXIS_EBD on its own clock, 32 to 16,384-word FIFO (build-time parameter EBD_OUT); never in the video output
Output width32 x LANE_NUM bits: 2 x LANE_NUM pixels per beat, 16-bit MSB-justified containers
Output buffer128 to 16,384 words (one word per beat), default 2,048
Control interfaceAXI4-Lite slave, 32-bit data, 24 registers in a 256-byte window
ClocksLane clock from the PHY = line rate / 20 (237.6 MHz at 4.752 Gb/s); register clock and stream clocks independent
Target devicesAMD Zynq UltraScale+ MPSoC, Kria K26 SOM, Kintex UltraScale+, Artix UltraScale+
SoftwareDriver for setup and control on MicroBlaze, Zynq-7000 and Zynq UltraScale+ MPSoC, supplied on purchase
Design flowAMD Vivado Design Suite, IP Integrator or RTL instantiation