Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 4: Register Map

4.7Embedded data output

Present when the embedded data output is built (HWCFG.EBD_OUT = 1). Without it both read 0 and the two VID_CTRL bits have no effect, so software that finds HWCFG.EBD_OUT = 0 should not show them.

0x58EBD_FRAME_INFOROreset 0x00000000

Counts the frames that sent embedded data lines and the lines of the latest such frame. Reads 0 when the embedded data output is not built (HWCFG.EBD_OUT = 0).

BitsFieldAccessResetDescription
[31:16]FRAMESRO0Frames that sent at least one embedded data line (wraps).
[15:0]LINESRO0Embedded data lines of the latest frame that sent any; counts up while its lines go out.
0x5CEBD_OVF_CNTROreset 0x00000000

An event is one frame whose embedded data lines were cut or dropped because the sink held m_axis_ebd_tready low until the EBD FIFO filled. The image stream is never affected. A stream reset on m_axis_ebd_aresetn is not an overflow. Reads 0 when the embedded data output is not built.

BitsFieldAccessResetDescription
[31]OVFRO0Sticky overflow flag. Cleared by reset or VID_CTRL.EBD_OVF_CLR.
[30:16]reserved0Reserved, reads 0.
[15:0]OVF_EVENTSRO0Frames whose embedded data lines were cut or dropped. Stops at 0xFFFF.