Document ID
APT-DS-SLVS-RX-0001
Revision
2.1
IP version
3.4.1
Release date
November 2026
Chapter 4: Register Map

4.6Video output

These registers control and report the video output stage: the crop, the frame counter and the output overflow status. VID_CTRL also holds the two embedded data output controls.

0x30VID_LINE_SKIPRWreset 0x00000000

Crop: number of image lines removed at the start of every frame. Taken at each Frame Start, so it can be written while streaming.

BitsFieldAccessResetDescription
[31:16]reserved0Reserved, write 0.
[15:0]LINE_SKIPRW0Lines to skip. 0 = none.
0x34VID_WIDTHRWreset 0x00000000

Crop: pixels kept from the start of each line. Rounded up to a whole beat of 2 x LANE_NUM pixels. Taken at each Frame Start.

BitsFieldAccessResetDescription
[31:16]reserved0Reserved, write 0.
[15:0]WIDTHRW0Pixels per line. 0 = the whole line.
0x38VID_HEIGHTRWreset 0x00000000

Crop: image lines kept after the skip. Taken at each Frame Start.

BitsFieldAccessResetDescription
[31:16]reserved0Reserved, write 0.
[15:0]HEIGHTRW0Lines per frame. 0 = every line up to Frame End.
0x3CVID_CTRLRWreset 0x00000000

Clears the overflow status of the two outputs and turns the embedded data output off.

BitsFieldAccessResetDescription
[31:3]reserved0Reserved, write 0.
[2]EBD_OFFRW01 = drop embedded data lines; the image does not change. Sampled between embedded data lines, so a line on its way is finished.
[1]EBD_OVF_CLRRW0While 1, the EBD overflow flag and EBD_OVF_CNT are held at 0. Write 1 then 0 to clear.
[0]OVF_CLRRW0While 1, the image overflow flag and VID_OVF_CNT are held at 0. Write 1 then 0 to clear.
0x40VID_FRAME_INFOROreset 0x00000000

One read answers the first bring-up questions: are frames arriving, and how many lines did the core deliver. Both fields are captured together.

BitsFieldAccessResetDescription
[31:16]FRAMESRO0Frame Starts seen by the output stage since reset (wraps).
[15:0]LINESRO0Lines delivered in the last complete frame, after the crop.
0x44VID_OVF_CNTROreset 0x00000000

Records frames cut or dropped because the output FIFO filled: a NATIVE line longer than the line buffer, or an AXI4-Stream sink that held tready low too long.

BitsFieldAccessResetDescription
[31]OVFRO0Sticky overflow flag. Cleared by reset or VID_CTRL.OVF_CLR.
[30:16]reserved0Reserved, reads 0.
[15:0]OVF_EVENTSRO0Frames cut or dropped by an overflow. Stops at 0xFFFF.